Herter’s Super No. 3, 3A,U,O3, 234 reloading press, upgrade Primer Catcher
NOTE: THIS IS FOR THE PRIMER CATCHER, NOT THE PRESS.
Now catching the spent primers with this device will mean lot less mess dealing with the old primers and trays!
This item is designed to Fit the Herter’s super No 3 press and 3A,U,O3
Will not fit the model 81 ,234, and O Super
Spent primers fall down the ram into the director which then makes
them fall into the catcher and out of the catcher tube exit.
Very easy slip in place design.
Magnets on bottom of catcher help hold it in place, but you will need to remove your primer lever
and use a bolt as seen in the pictures above, to hold it in place.
Magnetic Ram Primer director included.
The collection tube has been designed to use a 1/2″ I.D. tubing.
(Tubing not included, but can be got at any hardware store. This is to save you cost on shipping is a larger box)
NOTE: PRESS AND CLEAR TUBE NOT INCLUDED
AUCTION IS FOR PLASTIC PRIMER CATCHER ONLY, NOT THE PRESS.
Note: Made with 3d printer so may have some small imperfections, but overall looks great
Tom Yancey –
Fits perfectly and works great. Very dependable and amazingly durable . Purchasing additional unit for Herters 234 press now.
chris –
The catcher worked on my Super mod 3 with a small modification to the piece that goes into the ram on shown in the 2nd & 3rd picture.. a small section on the side at the top approx 5/8″ x 1/2″ needed to be trimmed off to fit under the shell holder. the ram on my vise is 1.18″ dia and is not the same as pictured with the groove. other than that it works as intended.